6.3.4
Adding a device to communication network
Before setting the parameters, it is necessary to configure the transmitter project in PDM.
1. Add the device to SIMATIC Modbus network:
– Select "File" > "New".
Type in a project name, for example FC commissioning.
– Go to "View" and select "Process Device Network" view.
– Right-click on the typed in Project name and select "Insert New Object" > "Networks".
– Right-click on "Networks" and "Insert New Object" > "Communication Network".
– Click on "Assign Device Type" and select "Modbus Network".
– Click "OK" two times.
Your PC is now added to the Modbus Network.
– Right-click on "Modbus Network" and select "Insert New Object" > "Object".
– Click on "Assign Device Type" , and select "Devices" > "Modbus" > "Sensors" > "Flow" >
"Coriolis" > "SIEMENS AG" > "SITRANS FC".
Commissioning
6.3 Remote commissioning with PDM FCT010
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
53