Siemens FCT010/DSL Скачать руководство пользователя страница 26

Страница: 26 / 180

3.7

Applications

The main applications of the Coriolis flowmeter can be found in all industries, such as:

• Chemical & Pharma: detergents, bulk chemicals, acids, alkalis, pharmaceuticals

• Food & Beverage: dairy products, beer, wine, soft drinks, fruit juices and pulps, bottling, CO

dosing, CIP/SIP-liquids, mixture recipe control

• Automotive: fuel injection nozzle & pump testing, filling of AC units, engine consumption,

paint robots

• Oil & Gas: filling of gas bottles, furnace control, test separators, bore-hole plasticizer dosing,

water-cut metering

• Water & Waste Water: dosing of chemicals for water treatment

3.8

Approvals

Note

For further details see Certificates and approvals (Page 114).

The device is available with approvals for general purpose and for hazardous areas. In all cases,
check the nameplate on your device, and confirm the approval rating.

Description
3.8 Approvals

SITRANS MASS 2100 & FC300 (FCT010/DSL)

Operating Instructions, 06/2020, A5E39788682-AB

Содержание FCT010/DSL





















































































































































































Результаты поиска

Содержание FCT010/DSL

Отзывы:

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 26 / 180

Результаты поиска

Содержание FCT010/DSL

Отзывы: