manualshive.com logo in svg

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 25 / 180

Поделиться
Скачать
Siemens FCT010/DSL Скачать руководство пользователя страница 25

Note
Approval identifications

Approval certificates and notified body identifications are available for download at 
www.siemens.com (

http://www.siemens.com/processinstrumentation/certificates

).

3.6

Features FCT010

• The SITRANS FCT010 can be used as Modbus slave in stand-alone or parallel operation on 

Modbus or third party automation systems

• Compact sensor design

• High immunity against process noise

• Fast response to step changes in flow

• High update rate (100 Hz) on all process values

• Measurement of:

– Mass flow

– Volume flow

– Density

– Medium temperature

• Independent low flow cut-off settings for massflow and volumeflow

• Automatic zero-point adjustment (initiated by host system)

• Process noise damping using digital signal processing (DSP).

• One totalizer for summation of massflow. The totalizer is reset on loss of power.

• Empty pipe monitoring

• Simulation of process values:

– Mass flow

– Volume flow

– Density

– Medium temperature

• Troubleshooting and sensor checking

• Use in hazardous areas according to specification

• Intelligent filtering system for aerated flow

• Unit selection of process values and totalizer

Description

3.6 Features FCT010

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

25

Содержание FCT010/DSL





















































































































































































Отзывы:

Нет отзывов