Siemens FC300, Руководство по эксплуатации, Страница: 96 / 518

The last view in each wizard (Finished) shows that the last step of the wizard was completed.
Any parameter changes confirmed with are saved immediately.
At any time in any wizard selecting Exit will bring you back to the main wizard menu without
discarding changes.
The first time the device is powered up, you will be prompted to set the language. The device
always starts up showing Language in English. When the language has been set, you will be
prompted to set the date and time.
After confirming/changing the date and time you will be asked if you want to start the Quick
Commissioning wizard. If you choose Yes (recommended), the Quick Commissioning wizard
will start. If you choose No, you accept the default values of the device, and the next HMI view
will be the operation view 1.
)&
Set Date and Time
4XLFN&RPPLVVLRQLQJ
About
Language
<HV
1R
&RQWLQXHZLWK4XLFN&RPPLVVLRQLQJ:L]DUG
)LUVW6WDUWXS:L]DUGLVQRZILQLVKHG
View
no. Text Options/description
1 Language Set the language: English, Deutsch, Français, Italiano, Español,
Português, РУССКИЙ,
汉语
, Polski, Dansk, Svenska, Suomeksi
2 "About" Information about the Quick Commissioning wizard
3 Set Date and Time The set date and time (real time clock) is used for all time stamps
of logged information
4 Quick Commissioning The Quick Commissioning wizard comprises the most important pa‐
rameters/menus for quick configuration of the flowmeter
6.3.4.2 Quick Commissioning wizard (menu item 1.1)
The Quick Commissioning wizard will guide you through configuration of parameters essential
for your application. You configure parameters essential for your application by selecting the
configuration path and subwizards appropriate for your application.
See also
Process Values wizard (menu item 1.3) (Page 102)
Gas Application wizard (menu item 1.5) (Page 107)
Commissioning
6.3 Local commissioning
MASS 2100 & FC300 (FCT030)
96
Operating Instructions, 06/2017, A5E39789040-AA