Siemens FC300 Скачать руководство пользователя страница 45

Страница: 45 / 518

WARNING

Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting hot, toxic and corrosive process media could be released at

the connections.
● Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection

and process media.

4.2.1.3

Mounting the sensor

● Install the sensor in well-supported pipelines in order to support the weight of the

flowmeter.

Figure 4-4

Avoid vibrations

● Center the connecting pipelines axially in order to assure a stress-free installation. The

flowmeter must not be used to bring the rest of the pipework into line; make sure the

pipework is correctly aligned before inserting the flow sensor.

● Install two supports or hangers symmetrically and stress-free on the pipeline in close

proximity to the process connections.

Note
Handling
Never lift the flowmeter using the housing, that is always lift the sensor body.

Avoid vibrations

● Make sure that any valves or pumps upstream of the sensor do not cavitate and do not

send vibrations into the sensor.

● Decouple vibrating pipeline from the flow sensor using flexible tube or couplings.

Installing/mounting

4.2 Installation instructions

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

Содержание FC300







































































































































































































































































































































































































































































































































Результаты поиска

Содержание FC300

Отзывы:

Siemens FC300, Руководство по эксплуатации, Страница: 45 / 518

Результаты поиска

Содержание FC300

Отзывы: