Siemens FC300 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 518

Siemens FC300 Скачать руководство пользователя страница 37

Installing/mounting

4

4.1

Basic safety notes

CAUTION

Hot surfaces resulting from hot process media
Risk of burns resulting from surface temperatures above 70 °C (155 °F).
● Take appropriate protective measures, for example contact protection.
● Make sure that protective measures do not cause the maximum permissible ambient

temperature to be exceeded. Refer to the information in Technical data (Page 215).

WARNING

Wetted parts unsuitable for the process media
Risk of injury or damage to device.
Hot, toxic and corrosive media could be released if the process medium is unsuitable for the

wetted parts.
● Ensure that the material of the device parts wetted by the process medium is suitable for

the medium. Refer to the information in Technical data (Page 215).

Note
Material compatibility
Siemens can provide you with support concerning selection of sensor components wetted by

process media. However, you are responsible for the selection of components. Siemens

accepts no liability for faults or failures resulting from incompatible materials.

WARNING

Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting hot, toxic and corrosive process media could be released at

the connections.
● Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection

and process media.

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

37

«
...
35
36
37
38
39
...
»

Содержание FC300







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов