Siemens FC300 Скачать руководство пользователя страница 17

Страница: 17 / 518

Safety notes

2.1

Preconditions for safe use

This device left the factory in good working condition. In order to maintain this status and to

ensure safe operation of the device, observe these instructions and all the specifications

relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols

from the device. Always keep the information and symbols in a completely legible state.

Symbol

Explanation
Consult operating instructions

Use the device only for flow measurement in accordance with this operating instruction and

observe the technical data.

WARNING

Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,

particularly in hazardous areas.
● Only carry out modifications that are described in the instructions for the device. Failure

to observe this requirement cancels the manufacturer's warranty and the product

approvals.

Note
Functional safety applications (SIL)
If the device is used in a functional safety application, refer to the functional safety manual.

2.2

Laws and directives

Observe the safety rules, provisions and laws applicable in your country during connection,

assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

Содержание FC300







































































































































































































































































































































































































































































































































Результаты поиска

Содержание FC300

Отзывы:

Siemens FC300, Руководство по эксплуатации, Страница: 17 / 518

Результаты поиска

Содержание FC300

Отзывы: