Siemens FC300 Скачать руководство пользователя страница 169 | Manualshive

Страница: 169 / 518

Siemens FC300 Скачать руководство пользователя страница 169

9.3

Cleaning

Cleaning the enclosure

● Clean the outside of the enclosure with the inscriptions and the display window using a

cloth moistened with water or a mild detergent.

● Do not use any aggressive cleansing agents or solvents, e.g. acetone. Plastic parts or the

painted surface could be damaged. The inscriptions could become unreadable.

WARNING

Electrostatic charge
Risk of explosion in hazardous areas if electrostatic charges develop, for example, when

cleaning plastic surfaces with a dry cloth.
● Prevent electrostatic charging in hazardous areas.

9.4

Maintenance and repair work

WARNING

Maintenance during continued operation in a hazardous area
There is a risk of explosion when carrying out repairs and maintenance on the device in a

hazardous area.
● Isolate the device from power.
- or -
● Ensure that the atmosphere is explosion-free (hot work permit).

WARNING

Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
● Only use original accessories or original spare parts.
● Observe all relevant installation and safety instructions described in the instructions for

the device or enclosed with the accessory or spare part.

Service and maintenance

9.4 Maintenance and repair work

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

169

«
...
167
168
169
170
171
...
»

Содержание FC300







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов