manualshive.com logo in svg

Siemens FC300, Руководство по эксплуатации, Страница: 100 / 518

Поделиться
Скачать
Siemens FC300 Скачать руководство пользователя страница 100

2

Select zero point adjust‐
ment type

Auto, Manual

3-4

Configure

Configure duration and limits

5

Auto Adjust Zero point

Cancel, Start (progress, result, standard deviation and offset)

6

In progress

The progress bar is shown

7

Result

Information on success or failure of zero point adjustment

8-9

View result    

Standard Deviation and Offset values

*: Pressing Cancel will bypass the Zero Point Adjustment and go to view 10.

Note
View result
Standard Deviation and Offset values are only updated if the zero point adjustment was 

completed successfully. Otherwise the previous values are used.

6.3.4.5

Wizards

The HMI wizard graphics show an overview of each HMI wizard and of the keys used to 

navigate through the wizards. In the upper left corner of each view the wizard name (for 

example "Process Values") and the step name (for example "Unit") of the wizard is shown. In 

the upper right corner the view number (for example 5 of 18 in the Process Values wizard) is 

shown.

2

1

3

①

Wizard name

②

Step name / Parameter name

③

View number / Total views in wizard

The purpose of the HMI wizards is to guide you through a quick set-up of various parameters.
The following HMI wizards are available:
● Quick Commissioning
● Process Values
● Zero Point Adjustment
● Inputs/Outputs
● Gas Application
● Pulsating Flow
● Dosing Application

Commissioning
6.3 Local commissioning

MASS 2100 & FC300 (FCT030)

100

Operating Instructions, 06/2017, A5E39789040-AA

Содержание FC300







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов