Siemens EX9 LX Series Скачать руководство пользователя

Страница: 37 / 44

Cleaning

Hood control settings

Hood control settings

You can adapt the hood controls to suit your needs at

any time.

Note:

The

™‚‰

™ƒ‹

™ƒ‚

and

™ƒƒ

settings are only

displayed if the appliance is connected to an extractor

hood.

Cleaning

Cleaning

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Hob

Cleaning

Always clean the hob after cooking. This will prevent

food deposits from becoming burned on. Only clean the

hob after the residual heat indicator has gone out.
Clean the hob with a damp dish cloth and dry it with a

cloth or towel to prevent limescale build-up.
Only use cleaning agents that are suitable for this type

of hob. Observe the manufacturer's instructions on the

product packaging.
Never use:

■

Undiluted washing-up liquid

■

Cleaning agents designed for dishwashers

■

Abrasive cleaners

■

Harsh cleaning agents, such as oven spray and

limescale remover

■

Scouring pads

■

High-pressure cleaners or steam jet cleaners

Stubborn dirt is best removed with a glass scraper,

available from retailers. Observe the manufacturer's

instructions.
You can obtain a suitable glass scraper from customer

services or through our online shop.
Using a special sponge for cleaning glass-ceramic

hobs achieves a great cleaning result.

Note:

Do not use any cleaning agents while the hob is

still hot. This may mark the surface. Make sure that any

residue left by cleaning agents is removed.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■

Only use warm soapy water

■

Wash new dish cloths thoroughly before use.

■

Do not use harsh or abrasive cleaning agents.

■

Do not use a glass scraper or sharp objects.

Symbol

Function

™‚‡

Hob-hood connection

‹

Not connected / disconnect.

‚

Connect.

Connected to home network (WLAN).

„

Connected to extractor hood.

™‚‰

Automatic fan switch-on

‹

Switched off.
The hood must be switched on manually if needed.

‚

Switched on in automatic mode.*
In automatic mode, the hood switches itself on when a

cooking zone is switched on.

Switched on in manual mode.
The hood switches itself on with a default setting when a

cooking zone is switched on.

™ƒ‹

Fan run-on

‹

The fan switches itself off when the hob is switched off.

‚

Switched on in automatic mode.*

Switched on with standard fan run-on.

„

No change in settings.

™ƒ‚

Switch light on automatically

‹

Switched off.

‚

Switched on.*
The light switches itself on when the hob is switched on.

™ƒƒ

Switch light off automatically

‹

Switched off.*

‚

Switched on.
The light switches itself off when the hob is switched off.

* Basic setting

Potential marks

Limescale and water

marks

Clean the hob as soon as it has cooled down.

You can use a cleaning agent suitable for

glass-ceramic hobs.*

Sugar, rice starch or

plastic

Clean immediately. Use a glass scraper. Cau-

tion: Risk of burns.*

* Then clean with a damp dish cloth and dry with a cloth or towel.

Содержание EX9 LX Series













































Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды

Siemens EX9 LX Series, Инструкция по эксплуатации

Результаты поиска

Содержание EX9 LX Series

Отзывы:

Похожие инструкции для EX9 LX Series

Бренды по названию

Популярные бренды