manualshive.com logo in svg

Siemens EX8 LX6 Series, Инструкция по эксплуатации

Поделиться
Скачать
Siemens EX8 LX6 Series Скачать руководство пользователя страница 18

en

    Operating the appliance

18

Manual hood control

You can control the ventilation setting manually.

Note: 

Using tall items of cookware may prevent the 

extraction system from working at optimum power. The 

extraction power can be improved by placing a lid on 

the cookware at an angle.

Activation

1.

Touch the 

I

 symbol.

The ventilation system starts at the preset power 

level.

2.

Within the next 10 seconds, select the required 

power level in the settings area.

The selected power level lights up.

3.

Touch the 

I

 symbol to confirm the selected setting.

The ventilation system switched on.

Changing and switching off

Touch the 

I

 symbol and select the required power 

level or set it to 

‹

 in the settings area.

Intensive setting

There are two intensive modes for the ventilation 

system. If you activate the intensive settings, the 

ventilation system works at maximum output for a short 

time.

Activation

Touch the 

I

 symbol and select the required intensive 

setting.

■

Intensive setting I 

: Touch the 

&

 symbol. The display 

›

 lights up. The intensive setting is activated.

■

Intensive setting II

: Touch the 

&

 symbol twice. The 

›

 display lights up. The intensive setting is activated.

Note: 

After eight minutes, the appliance automatically 

switches back to fan setting 

Š

.

Changing and switching off

Touch the 

I

 symbol and select the required power 

level or set it to 

‹

 in the settings area.

Automatic start

If you select a power level for a cooking zone, the 

automatic start switches on.
The hob comes with sensor-controlled automatic start 

as standard. You can find out how to change this 

setting in section 

~

 "Basic settings"

.

Automatic start with sensor control

The air quality sensor automatically registers the 

cooking vapours, selects the optimum power level and 

lights up the 

‘

 display. 

Automatic start via power levels

The ventilation system switches on at a power level in 

accordance with the respective power level for the 

cooking zone.

Automatic mode with sensor control

The hob has an air quality sensor that automatically 

registers the cooking vapours and switches on the 

ventilation system.
If the automatic start is switched off or is set in 

accordance with the power levels, you can switch on 

operation with sensor control manually at any time.

Activation

Touch the 

o

 symbol. The 

‘

 display lights up and the 

optimum power level is set automatically with the help 

of the sensor.

Deactivating

Touch the 

o

 symbol. The 

‘

 display goes out. The 

sensor control is switched off.

Note: 

You can find out how to set the sensor sensitivity 

in section 

~

 "Basic settings"

.

Run-on function

The run-on function allows the ventilation system to 

continue operating for a few minutes after the hob has 

been switched off. This removes any remaining cooking 

vapours. The ventilation system then automatically 

switches off.
The hob is supplied as standard with the run-on time 

with a maximum switch-off time. You can find out how to 

change this setting in section 

~

 "Basic settings"

.

Activation

The run-on time is possible depending on the 

configured basic settings:

■

Via the control for the air quality sensor. The 

I

 

symbol and the 

‘

 display light up.

■

With a maximum switch-off time. The 

I

 symbol 

lights up.

Note: 

The run-on function only switches on if at least 

one cooking zone has been switched on for at least one 

minute.

Deactivating

Manual

Touch the 

I

 symbol. The run-on function is switched 

off.

Automatic

The run-on function is switched off in the following 

cases:

■

The run-on time has elapsed.

■

The appliance is switched on again.

■

The sensor ensures that the air quality is in order.

Содержание EX8 LX6 Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды