Siemens ET6 LNV1 Series, Руководство пользователя, Страница: 17 / 24

Hob-based hood control
en
17
Requirements
¡
Your router has a WPS button. You will find informa-
tion about this in the manual for your router.
¡
The extractor hood is connected to the WLAN home
network (Wi-Fi).
1.
Switch on the hob.
2.
Press and hold for 4 seconds.
a The display will show the product information.
3.
Touch repeatedly until the display alternately
shows and ⁠ ⁠.
a
(not connected) or (connected to WLAN home
network (Wi-Fi) ) lights up on the cooking zone dis-
play.
4.
Set the value on the control panel.
a
flashes on the hotplate display.
5.
If the appliance has not yet been connected to the
WLAN home network (Wi-Fi) , press the WPS button
on the router within the next two minutes.
a
The hob connects to the WLAN home network
(Wi-Fi) , and lights up on the cooking zone dis-
play. The hob then automatically starts connecting
to the extractor hood.
6.
You now have two minutes to start the connection
process on the extractor hood.
a
Once the connection has been established, lights
up on the cooking zone display.
7.
Exit the basic settings.
a
The control panel shows the symbols for hob-based
hood control.
15.3 Resetting Home Connect settings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the Home Connect settings.
Note:
If you reset the Home Connect settings, the con-
nection to any extractor hood will also be terminated.
1.
Press and hold for 4 seconds.
a The display will show the product information.
2.
Touch repeatedly until the display alternately
shows and ⁠ ⁠.
3.
Set the value on the control panel.
15.4 Controlling the hood via the hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1.
Touch ⁠.
2.
Select a fan setting on the control panel.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, touch 4 or 5 on the
control panel. Alternatively, you can repeatedly
touch until the required intensive setting is dis-
played.
Switching off the fan
▶
Select the fan setting 0 on the control panel.
Switching on automatic mode
▶
Press and hold until the display shows ⁠.
a The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
▶
Press and hold until goes out.
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1.
To switch the lighting on, touch ⁠.
2.
To switch the lighting off, touch again.
15.5 Overview of the hood control settings
You can change the behaviour of your extractor hood in the basic settings of your hob, depending on switch-on/off
of the hob or individual cooking zones.
Setting Selection Description
⁠ ⁠ – Not connected/disconnect
– Start connection process
– Connected to WLAN home network (Wi-Fi)
– Connected to extractor hood
Connection hob - extractor hood
⁠ ⁠ – Switched off. The extractor hood will need to
be switched on manually, if required.
– Switched on in automatic mode
1
. In automatic
mode the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
Automatic fan start-up
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1 Factory setting (may vary according to model)