Siemens ET6 DK Series, Инструкция по эксплуатации, Страница: 9 / 12

9
Changing or cancelling the cooking time
Touch the 0 symbol repeatedly until the desired x indicator
lights up brightly. Above the timer display, 0 lights up for
10 seconds. During these 10 seconds, change the cooking
time in the settings area or set it to ‹‹ .
Note:
You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Touch the
0 symbol repeatedly until the desired x indicator
lights up brightly. Use the setting disc to change the cooking
time or set it to ‹‹ .
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
1.
Touch the
0
symbol repeatedly until the
U
indicator for the
kitchen timer lights up.
‹‹
lights up on the timer display.
Above the timer display,
0
lights up for 10 seconds
2.
Within this period, set the desired time with any one of the
setting discs.
The timer starts counting down after a few seconds.
When the cooking time has elapsed
A signal sounds once the time has elapsed. ‹‹ lights up on
the timer display. The U indicator for the kitchen timer lights up
brightly. After 10 seconds, the indicator switches off.
Changing the time
Touch the
0
symbol repeatedly until the
U
indicator for the
kitchen timer lights up brightly. Make your new settings.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
”
and
‰
flash alternately in the
hotplate indicator.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Control panel pause
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the # symbol. A signal sounds. The
control panel is locked for 30 seconds. You can wipe over the
control panel and remove the setting discs without altering the
settings.
Note:
The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator Function
™‚
Automatic childproof lock
‹
Switched off.*
‚ Switched on.
™ƒ
Audible signal
‹ Confirmation signal and operation error signal switched off.
‚ Only operation error signal switched on.
ƒ Confirmation signal and operation error signal switched on.*
™†
Automatic timer
‹
Switched off.
‚ - ŠŠ Duration after which the hotplates switch off
*Basic setting