Siemens EQ.3, Инструкция по эксплуатации

Страница: 16 / 152

en
Settings
16
Frost protection
To prevent frost damage during
transportation and storage, completely
empty the appliance beforehand.
Info
: The appliance must be ready for
use and the water tank filled.
1.
Place a large container under the
outlet of the milk frother and push
the frother down.
2.
Press and hold the
milk
button for at
least 5 seconds.
The LED in the button flashes, and
the appliance now heats up.
3.
As soon as steam escapes from the
milk frother, remove the water tank.
4.
Allow the appliance to cool down.
Wait until
)
"Water tank empty"
appears.
5.
Use the
k
button to switch the
appliance off.
6.
Empty the water tank and the drip
tray and thoroughly clean the
appliance.
The appliance can now be transported
or stored.
Note:
The brewing unit is now secured
and cannot be removed.
1
Settings
Settings
This appliance has different factory
settings. You can customise the settings
on the appliance.
Note: If no button is pressed within
90 seconds, the appliance switches to
"Choose beverage" without saving. The
previous setting remains unchanged.
You can select the following settings:
Automatic switch-off
Selecting automati c switch- off
The appliance switches off automatically
at a specific time after the last button
was pressed. This time can be selected,
with settings from 15 minutes to
4 hours possible here.
1.
Press and hold
%
and
calc’nClean for at least 3 seconds.
2.
Touch the “
V
” button
cappuccino repeatedly until "Auto
Stand-by" appears.
3.
Confirm by pressing the “ok” button
latte macchiato .
The factory settings are activated,
the language selection appears.
4.
Touch the “
V
” button cappuccino
and select the time. The following
settings are possible:
–
after 15 min.
–
after 30 min. (factory setting)
–
after 1 hour
–
after 2 hours
–
after 4 hours
5.
Confirm by pressing the “ok” button
latte macchiato .
The factory settings are activated,
the language selection appears.
6.
Touch the “
¾
” button caffe crema to
exit the menu.