8 0 6 8 1 9 A 0 3
s
Test Kit, Communication Adapter, Power Supply
Dispositivo de prueba
Pocket de test pour
1
1 / 6
1
3
2
3
Installation Instructions / Instructivo de Instalación
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
For Use With Frame DG, FG, JG, LG, MG, NG & PG
Para Usar Con Caja Base DG, FG, JG, LG, MG, NG & PG
U.S. Cat. No.
Euro Order No.
I.L. No. 806819A03
9 lb.in.
[ 1.0 Nm ]
UPAPELTK
3VL9000-8AL01
Accessory [ Accesorio ]
ELTPHB
3VL9000-8AK01
3 x 9V
Item:
ELTPHB 3VL9000-8AK01
Cal. ISO 6789
2
NOTE - These instructions do not purport to cover all details
or variations in equipment, or to provide for every possible
contingency to be met in connection with installation,
operation or maintenance. Should further information be
desired or should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes, the matter
should be referred to the local Siemens sales office. The
contents of this instruction manual shall not become part of
or modify any prior or existing agreement, commitment or
relationship. The sales contract contains the entire obligation
of Siemens. The warranty contained in the contract between
the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names identified
by ® are registered trademarks of Siemens AG or Siemens
Industry, Inc. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
