8
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To turn on: press and hold the
@
symbol for approx. 4
seconds. The
@
indicator lights up for 10 seconds. The range
is locked.
To turn off: press and hold the
@
symbol for approx. 4
seconds. The lock is now deactivated.
The hob is locked
If a hotplate is programmed with the hob locked, the following
will occur:
■
On the hotplate's indicator,
‹
will flash or the residual heat
indicator will flash alternately with
‹
.
■
The indicator light over the symbol
@
will come on.
Switch off the hotplate. Switch off the lock.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
The Powerboost Function
The Powerboost function can be used to heat food more
quickly than using the power level
Š
.
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not switched on (see
figure). Otherwise,
›
and the power level will flash on the
selected hotplate display; the previously selected power level
will then be automatically set, without turning on the function.
To activate
1.
Select the desired power level.
2.
Press the
›
symbol which controls the selected hotplate. The
›
indicator lights up. The function has been turned on.
To desactivate
Press the
›
symbol. The
›
symbol switches off. The
Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Turning off a hotplate automatically
Enter the time period for the hotplate. The hotplate turns off
automatically once the time has elapsed.
How to program
1.
Select the required hotplate and power level.
2.
Press the
0
symbol several times until the required hotplate
is selected. The
‹‹
indicator lights up in the time program
function display.
The
x
indicator lights up on the hotplate.
3.
Press the
+
or
-
symbol on the time program function.
The basic settings are displayed.
Symbol
+
30 minutes
Symbol
-
10 minutes
4.
Set the required time using the
+
or
-
symbol.
After a few seconds, the timer will start to count down.
*URXS
*URXS
*URXS
*URXS
