background image

6

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show 

those which are still hot. Avoid touching a hotplate that displays 

this.

Even when switched off, the 

œ

/

 light will remain on as long as 

the hotplate remains hot.
If the pan is removed before the hotplate is turned off the

 œ

/

 

indicators and the selected power level will appear alternately.

Programming the hob

This section will show you how to program the hotplates. The 

table contains power levels and cooking times for several 

dishes. 

Switching the hob on and off

The hob is turned on and off using the controls.
When the hob is switched on, the power level display lights up.

Set the hotplate

Use the controls to set the desired power level. 
0 = hotplate switched off. 
Power level 1 = minimum power. 
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked 

with a dot.

Selecting the power level

Turn the control to the right until reaching the desired powered 

level.
The selected power level lights up on the indicator.

Switch off the hotplate

Turn the control to the left until reaching level 0. The hotplate 

turns off and the residual heat indicator appears.

Note: 

If no pan has been placed on the induction hotplate, the 

selected power level flashes. After a certain time, the hotplate 

switches off.

Cooking guidelines

The table below contains some examples. 
The cooking times depend on the power level, type, weight and 

quality of the food. As such they are approximate.
Power levels influence the cooking results.

Remove purées, creams and thick sauces from time to time, if 

they get too hot.
Use power level 9 to begin cooking.

q

Resistive plate-warming plate*

To turn on: switch on a hotplate. Press the 

L

 symbol, the 

L

 indicator lights up. 

Then press the 

Ù

 symbol.

To turn off: press the 

Ù

 symbol.**

* Turning on the hotplate: The corresponding indicator lights up. Once this has been activated, you do not need to have any other 

hotplate switched on.
** The residual heat warning light comes on.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Hotplate

Turning on and off

Ongoing cooking 

setting

Ongoing cooking time 

in minutes

Melt

Chocolate, chocolate coating, butter, honey
Gelatine

1-1.
1-1.

-
-

Heating and warming

Stew (e.g., lentils)
Milk**
Sausages heated in water**

1-2
1.-2.
3-4

-
-
-

* Continue cooking without a lid
** Uncovered

Содержание EI6..TB11 SERIES













Отзывы: