Siemens EH6..ME3 SERIES, Инструкция по эксплуатации

Страница: 6 / 20

6
Hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Even when switched off, the
œ
/
•
light will remain on as long as
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
œ
/
•
indicators and the selected power level will appear alternately.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off with the main switch.
To switch on: press the
#
symbol. The indicator above the
main switch lights up. The hob is ready for use.
To switch off: press the
# symbol until the indicator above the
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Setting the hotplate
The desired power level is set in the programming panel.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting the power level
The range must be switched on.
1.
Press the ¤ symbol of the desired hotplate. The ‹ and N
symbols light up in the display.
2.
Within the next 10 seconds, slide a finger on the
programming panel until the desired power level lights up.
3.
Changing the power level: select the hotplate and set the
desired level using the programming panel.
Switch off the hotplate
Select the hotplate and set it to
‹
in the programming panel.
The hotplate turns off and the residual heat indicator appears.
Notes
■
Upon selecting a hotplate the N symbol is displayed. It may
then proceed to be adjusted.
■
If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
Hotplate Turning on and off
$
Single hotplate Use a correctly sized pan
æ
Broiler The broiler turns on automatically when a pan large enough to reach its outer
edges is placed upon it.
q
Resistive plate-warming zone
To activate: press the
Ù
symbol and
‚
appears in the display.
To deactivate: press the Ù symbol again and ‹ appears in the display.
* The residual heat indicator lights up.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.