4
ID
Gas
Nz
Qn (kW)
m
3
/h
g/h
Bp
M
G20/25 mbar
91
1,75
0,167
-
32
B
G25/20 mbar
100
1,75
0,194
-
32
B
G25/25 mbar
95
1,75
0,194
-
32
B
G25.1/25 mbar
95
1,60
0,177
-
32
B
G25.3/25 mbar
95
1,75
0,19
-
32
B
G30/29 mbar
66
1,75
-
127
32
A
G30/37 mbar
61
1,75
-
127
32
A
G30/50 mbar
58
1,75
-
127
29
A
G31/37 mbar
66
1,75
-
125
32
A
G20/20 mbar
128
3,00
0,286
-
39
B
G20/25 mbar
120
3,00
0,286
-
39
B
G25/20 mbar
134
3,00
0,333
-
39
B
G25/25 mbar
126
3,00
0,333
-
39
B
G25.1/25 mbar
126
2,80
0,31
-
39
B
G25.3/25 mbar
126
3,00
0,325
-
39
B
G30/29 mbar
87
3,00
-
218
39
A
G30/37 mbar
80
3,00
-
218
39
A
G30/50 mbar
75
3,00
-
218
35
A
G31/37 mbar
87
3,00
-
214
39
A
G20/20 mbar
138
3,50
0,334
-
61
B
G20/25 mbar
130
3,50
0,334
-
61
B
G25/20 mbar
143
3,50
0,388
-
61
B
G25/25 mbar
136
3,50
0,388
-
61
B
G25.1/25 mbar
136
3,30
0,365
-
61
B
G25.3/25 mbar
136
3,50
0,379
-
61
B
G30/29 mbar
90
3,30
-
240
61
A
G30/37 mbar
84
3,30
-
240
61
A
G30/50 mbar
71
3,30
-
240
55
A
G31/37 mbar
90
3,30
-
240
61
A
17
en
Safe installation
Follow these safety instructions when installing the
appliance.
¡
Read this instruction manual carefully.
¡
The images shown in these instructions are for
guidance only.
¡
The appliance can only be used safely if it is cor-
rectly installed according to the safety instructions.
The installer is responsible for ensuring that the
appliance works perfectly at its installation loca-
tion.
WARNING ‒ Risk of explosion!
Escaping gas may cause an explosion.
▶
All Installation, connection, regulating and conver-
sion work to a different gas type must be carried
out by an authorised professional while taking into
account the respective applicable regulations and
legal requirements as well as the regulations re-
garding the local electricity and gas suppliers.
Special attention must be paid to the provisions
and guidelines that are applicable for the ventila-
tion. For conversion work to a different gas type,
we recommend that you call the after-sales ser-
vice.
¡
Only use this appliance in sufficiently ventilated
areas.
¡
Do not connect the appliance to an exhaust gas
system for combustion products.
¡
Never install the appliance in boats or in vehicles.
¡
The warranty applies only when using the appli-
ance as intended.
¡
Before installing the appliance, check that the
local conditions of the supplier are compatible
with the appliance settings specified on the rating
plate (type of gas and pressure, power, voltage).
¡
Secure the power cord to the cabinet to prevent it
from touching hot parts of the oven or hob.
¡
Before any work is carried out on the appliance,
switch off the power supply and the gas supply.
¡
Connect the appliance to the power supply using
the earth.
¡
Do not make any changes to the inside of the ap-
pliance. If required, contact our technical cus-
tomer service.
Before installing
¡
This appliance is a class 3 appliance in accord-
ance with the EN 30-1-1 standard for gas appli-
ances: Built-in appliance.
¡
The unit in which the appliance is installed must
be stable and secured appropriately.
Содержание EG6B5HO92R
Страница 2: ...2 5 6 7 8 9 10 ...