Siemens Ecofast 3RK1 323-2AS54-1AA0, Руководство пользователя

Страница: 27 / 76

Wiring and interfaces
ECOFAST Motor Starters
GWA 4NEB 950 5221-12 DS 01
2-11
Deutsc
h
En
glish
Han Q4/2 power connectors
The power connectors belonging to a power tee connector and to the motor
starter consist of the following components:
Fig. 2-6: Han Q4/2 power connector
Assembling and wiring power connectors
Assemble and wire the power connectors according to the following
instructions:
Table 2-4: Assembling and wiring power connectors
Step Procedure
1 Guide the cable through the heavy-gauge threaded joint, the matching
enclosed sealing ring in each case and the connector housing.
2 Attach the jacks/contact pins to the strands
3 Push the jacks/contact pins into the socket insert/pin insert until they snap
into place.
4 Pull the cable back and screw the insert in place in the connector housing
with the enclosed screws.
5 Screw the heavy-gauge threaded joint tight.
Connector housing
Connector housing
Socket insert
Contact sockets
Contact pins
Pin insert
Han Q4/2 socket Han Q4/2pin
for looping through the main power for connecting the main power