Siemens Drager medical Carina, Инструкция по эксплуатации, Страница: 93 / 144

Instructions for Use Carina SW 3.n
93
Configuration
Selecting display for 2 measured
values
Value 1 and value 2 are freely selectable for the dis-
play.
1 Value 1: Off, PIP, VTi (VT), f, PEEP, MVi (MV),
MV
leak
, P
mean
2 Value 2: Off, PIP, VTi (VT), f, PEEP, MVi (MV),
MV
leak
, P
mean
The measurements for value 1 and value 2 cannot
be identical.
3 In menu 2: Press » Set value « button.
z Press » Value 1 « button. Select display and
confirm.
z Press » Value 2 « button. Select display and
confirm.
Selecting an application method
z To switch Carina to standby see page 59.
4 In menu 2, press the » Method « button.
z Select and confirm » Mask « or » Tube « with
rotary knob.
The application method selected is displayed in the
status line on the screen.
The »
Mask « application method is only available
for hose systems with leak valve.
Switching LPO mode on/off
z To switch Carina to standby see page 59.
5 In menu 2, press the » LPO « button.
To switch on:
z Select and confirm » On « with rotary knob.
The status line on the screen shows » LPO «.
To switch off:
z Select and confirm » Off « with rotary knob.
55
2
1 2
541
3
553
541
4
541
5