Siemens DCA Vantage, Руководство оператора, Страница: 43 / 214

DCA Vantage Operator’s Guide 43
Op
era
ting th
e Syst
em
Operator Levels
• Level 1 – All functions

Provides access to all functions on the system.
• Level 2
• Level 3
Level 1 is the highest level, typically for a supervisor or system administrator.
Levels 2 and 3 are more restrictive and are typically for an operator running
daily tests and maintenance activities.
Adding an Operator
The system verifies that a Level 1 operator is configured in the system. If not,
you will be prompted to add this operator first. At the initial system installation,
there are no operators or access codes created.
The first operator added to the system must be a Level 1 operator. There must
be at least one Level 1 operator on the system at all times. The system
prevents the last Level 1 operator from being deleted, or the level changed.
The access code field is alphanumeric with the alpha characters entered as
uppercase A–Z and 0–9. The access code can be up to 13 characters.
1. At the Home screen, select Menu .
2. Select
System Settings
from the Menu screen.
3. At the System Settings menu, select Additional Settings .
4. Select
General
.
5. Select System Access .
6. Select the system access level (Unrestricted, Restricted, Restricted Plus,
or Fully Restricted).
The Operator button enables after selecting a system access level.
7. Select
Operator
.
8. To add an operator, select ADD .
Use the alphanumeric keypad or external barcode reader to enter an
Operator ID in the Name field. The Operator ID can include letters and
numbers. The maximum number of characters for an Operator ID is 16.
9. Select Enter to save the Operator ID.
10. To add an access code, select
Edit
to the right of the ID field.
Use the alphanumeric keypad or external barcode reader to enter an
access code.
11. Select
Enter
.
12. At the Add Operator screen, select Save .
The operator information is saved.