Siemens DCA Vantage, Руководство оператора, Страница: 159 / 214

DCA Vantage Operator’s Guide 159
C
u
st
om
izin
g
t
h
e S
y
s
te
m
Cu
st
o
m
izi
n
g th
e Sy
st
em
1. At the Home screen, select
Menu
.
2. Select System Settings , from the Menu screen.
3. At the System Settings menu, select
Additional Settings
.
4. Select Control Tests .
5. Select
Data Entry
.
The Control Sample Data Entry screen displays.
6. Select
Enabled
and select
Required
(if data must be entered) for each of
the following options:
• Operator ID
• Comment 1–3
7. To save the settings, select Save .
Setting Control Test Reminders
Use the Control Test Reminders screen to access the Control Test Log, and to
view or change the schedule for the control tests. The default setting is that
none of the Control Test Reminders are selected. After you select the check
box for a specific reminder, Schedule becomes active.
You must perform required control tests when they are scheduled. Patient test
is disabled until the required control is performed and passed. You can run a
control test prior to the scheduled time; however you are still reminded to run
the test at the schedule time.
You can perform optional control tests when they are scheduled. Patient tests
are not disabled when an optional control test is due.
1. At the Home screen, select Menu .
2. Select
System Settings
from the Menu screen.
3. At the System Settings menu, select Additional Settings .
4. Select
Control Tests
.
5. Select Reminders .
6. To set a control test reminder, select the check box.
The control test reminder is set and the schedule becomes active.
7. To view the schedule, select
Schedule
.
The reminder schedule displays.
8. To change the schedule to optional or required, select
Change
.
The Mode screen displays.
9. Select
Optional
or
Required
.
10. Select Next .
The Frequency screen displays.