Siemens D981, Техническое руководство

Страница: 20 / 39

SCSI Setup SCSI Setup
20 - English
A26361-D981-Z120-9-7419
Starting the SCSI Setup
You must enable the ultra-wide SCSI controller in the system BIOS to be able to
call the
SCSI Setup . Call the BIOS Setup and set the SCSI Controller field in the
Peripheral Configuration
menu to
enabled
.
²
Start your PC and press key combination
>&WUO@ >&WUO@
and
>$@ >$@
, when the following
message appears:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
The first menu of the SCSI setup , Configure/View Host Adapter Settings and SCSI Disk
Utilities
is displayed.
Working with the keyboard
Use the following keys when running the program:
¤ ¤ ¥ ¥
to make selections
Ï
Ï
to accept a selection
^(VF` ^(VF`
to call the previous menu and to terminate the
SCSI setup
.
^)` ^)`
to reset to the default settings
^)` ^)`
to toggle display between color and monochrome mode
Also note the status line at the bottom of the screen.
Terminating the SCSI setup
Depending on the current menu level, you can display the previous menu by
pressing the
>(6&@ >(6&@
key. If you have made changes in the current menu you will be
prompted to store them.
²
Keep pressing
>(6&@ >(6&@
until you arrive at the first menu (
Configure/View Host
Adapter Settings ).
²
Press the
>(6&@ >(6&@
key in the first menu and then follow the instructions on the
screen to terminate the SCSI Setup .