©
Siemens AG 2003, E:\Auftrag
\Siemens\MobilePhones\CX65 Ul
ysses\us\LA\CX65_CallSetup.fm
Setup
88
VAR Language: Am
erican; VAR
issue date: 16-Februar-2004
left page (88)
of CX 65 Ulysses us-en, A31008-H7100-A1-1-7619 (24.03.2004, 10:18)
Setup
Call setup
C
¢
T
¢
Call setup
¢
Select function.
Hide ID
b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting
b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions for
which calls should be forwarded to
your mailbox or other numbers.
Status check
You can check the current forward-
ing status for all conditions. After a
short pause, the current situation is
transmitted via the network and dis-
played.
Ö
Condition set.
Õ
Not set.
Ô
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
b
All set forwarding is cleared.
Set up call forwarding (example)
The most common condition for call
forwarding is, for example:
Unanswered
b
I
Select
Unanswered
.
(Includes the conditions
Not reachable
,
No reply
,
Busy
, see below)
C
Confirm.
Set
Select.
C
Confirm.
Ï
/
J
Select or enter the phone
number to which the calls
are to be forwarded.
§Mailbox§
Use existing mail-
box phone numbers, or
enter them if necessary.
C
Confirm. After a short
pause, the setting is con-
firmed via the network.