manualshive.com logo in svg

Siemens CSM 377, Руководство по эксплуатации

Поделиться
Скачать
Siemens CSM 377 Скачать руководство пользователя страница 25

4.3

Installation on a standard rail

Installation on a SIMATIC S7-300 standard rail

Note

The CSM 377 does not have a feedthrough for the backplane bus. It must therefore be mounted 
either at the start or end of the station!

1. Place the upper guide at the top of the CSM housing in the S7 standard rail.

2. Screw the CSM 377 compact switch module to the underside of the standard rail.

3. Fit the connectors for the power supply. See << Link to Figure 4.3>>

4. Insert the terminal block into the sockets on the device. See << Link to Figure 4.2>>

Figure 4-1

CSM 377 installation on a SIMATIC S7-300 standard rail

Uninstalling

To remove a CSM 377 compact switch module from the SIMATIC S7-300 standard rail:

1. First disconnect all connected cables. See << Link to Figure 4.6>>

2. Loosen the device screws on the underside of the S7 standard rail and lift the device away 

from the rail.

Installation

4.3 Installation on a standard rail

Compact Switch Module CSM 377
Operating Instructions, 06/2022, A2B00073499-02

25

Содержание CSM 377



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды