Siemens CP 443-1, Руководство пользователя

Страница: 57 / 76

9 Compatibility with Predecessor Products
B4A − 57
CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A
Release 01/2007
C79000-G8976-C193-06
Notice
The configuration of fault − tolerant connections when using this CP is prevented
only as of STEP 7 version V5.3 service pack 1. If you are still using STEP 7
version V5.3, please avoid configuring fault
− tolerant connections in conjunction
with this CP.
9.3 Replacing Older Modules
The CP 443 − 1 Advanced described here allows communication both using the ISO
transport protocol as well as the TCP/IP protocol. It also includes the full IT
functionality of the CP 443
− 1 IT. It is fully compatible with and, taking into account
the restrictions described above (adapted configuration data), can be used to
replace the following previous modules:
S CP 443 − 1 ISO with order number 6GK7 443 − 1BX00 − 0XE0
S CP 443 − 1 ISO with order number 6GK7 443 − 1BX01 − 0XE0
S CP 443 − 1 TCP with order number 6GK7 443 − 1EX00 − 0XE0
S CP 443-1 TCP with order number 6GK7 443-1EX01-0XE0.
S CP 443-1 with order number 6GK7 443-1EX02-0XE0.
S CP 443-1 with order number 6GK7 443-1EX10-0XE0.
S CP 443 − 1 with order number 6GK7 443 − 1EX11 − 0XE0
S CP 443 − 1 IT with order number 6GK7 443 − 1GX00 − 0XE0
S CP 443 − 1 IT with order number 6GK7 443 − 1GX10 − 0XE0
S CP 443 − 1 IT with order number 6GK7 443 − 1GX11 − 0XE0
Module Replacement
When replacing an older module with the module described here, please keep to
the steps outlined below: