Siemens CP 443-1 Скачать руководство пользователя

Страница: 53 / 76

8 The CP 443-1 Advanced as Web Server: HTML Process Control

B4A

−

CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A

Release 01/2007
C79000-G8976-C193-06

8 The CP 443-1 Advanced as Web Server: HTML

Process Control

The CP 443-1 Advanced provides you with the function of a Web server for access
using a Web browser.

The CP 443-1 Advanced provides an additional memory area for storage of files.
This area is used to store HTML pages and S7 applets.

HTML pages are used to indicate and display information in a Web browser. S7
applets are Java applets specially written for SIMATIC S7 and that are used to
allow write or read access to the S7-CPU.

When the CP 443-1 Advanced is supplied, there are HTML system pages, S7
applets, S7 beans and further information in the file system.

Please note the following special features when operating IT functions:

Note

The data exchange for productive communication (S7 conne

SEND/RECEIVE connections) always has a higher priority than data exchange

with the Web browser. This can lead to delays in the HTML process control in the

Web browser.

Web Browser

To access the HTML pages on the CP 443-1 Advanced, you require a Web
browser.

The following Web browsers are suitable for communication with the CP 443-1
Advanced (other browsers also possible):

Netscape Communicator (recommended version: 4.7 or higher)

Internet Explorer (recommended version: 5.0 or higher)
These Web browsers support all the requirements necessary for the

implementation of the IT functions (Java reference implementation

−

Java

Development Kit) 1.1.x is supported) in conjunction with the CP 443-1

Advanced.

You will find these Web browsers, information and addons on the Internet.

Содержание CP 443-1













































































Результаты поиска

Содержание CP 443-1

Отзывы:

Похожие инструкции для CP 443-1

Бренды по названию

Популярные бренды

Siemens CP 443-1, Руководство пользователя

Результаты поиска

Содержание CP 443-1

Отзывы:

Похожие инструкции для CP 443-1

Бренды по названию

Популярные бренды