Siemens CP 1542SP-1, Руководство по эксплуатации

Страница: 27 / 118

Application and functions
1.9 Requirements for use
CP 154xSP-1
Operating Instructions, 12/2019, C79000-G8976-C426-05
27
1.9 Requirements for use
1.9.1 Hardware requirements
Bus adapter
To connect to the Ethernet network, the CP requires a BusAdapter. A BusAdapter does not
ship with the CP.
The CP supports the following BusAdapter:
● BA 2xRJ45
● BA 2xFC
● BA 2xSCRJ
● BA SCRJ/RJ45
● BA SCRJ/FC
You can find further details on the BusAdapters in the appendix BusAdapter (Page 109) and
the manual /3/ (Page 114).
CPUs and other components of the ET 200SP
The CP supports operation in stations that contain one of the following CPUs:
● CPU 1510SP-1 PN
Article number: 6ES7510-1DJ01-0AB0
● CPU 1510SP F-1 PN
Article number: 6ES7510-1SJ01-0AB0
● CPU 1512SP-1 PN
Article number: 6ES7512-1DK01-0AB0
● CPU 1512SP F-1 PN
Article number: 6ES7512-1SK01-0AB0
Further parts and modules that are also required to set up the ET 200SP station, such as
rails, I/O modules or cabling are not listed here. See also /3/ (Page 114) for information on
this.
Components of the communications partner
Components required by the communications partners of the CP 1542SP-1 IRC are not
listed here. You will find references to other products (e.g. TCSB) in the list of references in
the appendix of the manual.