Siemens CP 1243-7 LTE, Руководство по эксплуатации

Страница: 47 / 154

Configuration
4.4 Time-of-day synchronization
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
47
● Station number
● Slot of the CP
● Telecontrol password
● Authorized phone numbers
Address and authentication information for communication with TCSB
The following information is required for the STEP 7 configuration of the CP for
communication with TCSB:
● Parameters in the "Partner stations" parameter group
–
Partner IP address
Fixed IP address of the DSL router via which the telecontrol server is connected to the
Internet.
– Partner port (port number of the listener port of TCSB)
● Parameters in the "CP identification" parameter group ("Security" parameter group)
–
Project number
– Station number
– Password (for authentication)
4.4 Time-of-day synchronization
Synchronization method of the CP
Note
Time-of-day synchronization of the CP
With applications that require time-of-day synchronization (e.g. telecontrol), you need to
synchronize the time of day of the CP regularly. If you do not synchronize the time of day of
the CP regularly, there may be deviations of several seconds per day in the time information
of the CP.
With security functions enabled, you need to enable time-of-day synchronization.
Note
Recommendation for setting the time
Synchronization with a external clock at intervals of approximately 10 seconds is
recommended. This achieves as small a deviation as possible between the internal time and
the absolute time.