Childproof lock
en
17
Ending the timer
Requirement:
A signal sounds. :
is shown in the
display.
▶
Press any symbol.
a
The timer is switched off.
Changing the timer
▶
Use the rotary selector to change the timer duration.
a
After a few seconds, the appliance displays the set
timer duration.
Cancelling the timer
▶
Use the rotary selector to set the timer duration to
: .
a
The timer is switched off.
11
Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
11.1 Activating the childproof lock
Requirement:
The appliance is switched off.
▶
Press and hold
for approx. 4 seconds.
a
The control panel is locked.
a
The
symbol appears in the display.
a
If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button
11.2 Deactivating the childproof lock
▶
Press and hold
for approx. 4 seconds.
a
The control panel is unlocked.
12
Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Description
Signal duration
= short = 10 seconds
= medium = 30 seconds
1
= long = 2 minutes
Signal duration after a
cooking time has elapsed
or the timer is set.
Button tone
= off
= on
1
Switch the button tones on
or off.
Display brightness
= low
= medium
1
= high
Set the brightness of the
display.
Time indicator
= off
= on
1
Show the clock time in the
display.
Interior lighting
= off
= on
1
Switch the interior lighting
on or off.
Factory setting
= off
1
= on
Reset the changed settings
to the factory settings.
Demo mode
= off
1
= on
Switch demo mode on or
off.
Note:
Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
Signal volume
= low
= medium
1
= high
Setting the signal volume.
1
Factory setting (may vary according to model)
