Siemens CLINITEK Status+ Скачать руководство пользователя страница 159

Страница: 159 / 172

CLINITEK Analyzer Operator’s Guide

159

Glos

sar
y

Appendix F: Glossary

The glossary contains hardware and software terms and acronyms.

Hardware Terms

The following table defines hardware terms commonly used on the
CLINITEK analyzer.

Term

Definition

bar code

Encoded information that is read by an
optical scanner.

calibration bar

The white calibration bar (on the test table)
that provides traceable calibration.

cassette

A Clinitest hCG reagent cassette for
pregnancy test use.

check cassette

A system diagnostic cassette that simulates a
reacted test area.

CLINITEK
analyzer

The CLINITEK Status analyzer with increased
memory and additional features.

CLINITEK Status
Connect system

The CLINITEK analyzer attached to
the CLINITEK Status connector.

connector

The CLINITEK Status connector platform
where you can attach the CLINITEK
analyzer.

display

The LCD that displays the software user

interface.

Ethernet port

The port where a network Ethernet cable is
inserted.

external bar-code

reader

An optional bar-code scanner that is

connected to the RS232 port on the
connector. Used to enter data.

external printer

An optional printer is connected to the
CLINITEK Status Connect system, only when
you connect the CLINITEK analyzer
to the CLINITEK Status connector.

hardware

The physical components of the analyzer.

Содержание CLINITEK Status+













































































































































































Результаты поиска

Содержание CLINITEK Status+

Отзывы:

Siemens CLINITEK Status+, Руководство оператора, Страница: 159 / 172

Результаты поиска

Содержание CLINITEK Status+

Отзывы: