Siemens CLINITEK Status+, Руководство оператора, Страница: 116 / 172

116 CLINITEK Analyzer Operator’s Guide
System C
onf
iguration
Note By default, the operator name does not print or display with
the patient test results. If you want to include an operator name
with the patient test results, see
Custom Set Up ‚ page 96.
7. Select Done 3 times to return to the Select Ready screen.
Edit the Authorized Operator Functions
When you set up authorized operators, they can perform the following
tasks:
• Run patient tests
• Run QC tests (with a Status connector)
• Recall results
• Modify System Settings
To edit the authorized operator functions for an operator, perform the
following steps:
1. On the Select Ready screen, select Instrument Set Up .
2. On the Choose Settings screen, select Instrument Settings .
3. On the Instrument Settings screen, select Authorized Operator .
4. On the Authorized Operator screen, select View operators list .
5. On the Authorized Operator – Operators list screen, scroll to and
highlight the operator name you want to edit, and select Select .
6. On the Authorized operator screen, in the Operator ID functions
area, select Edit .
The Authorized Operator-Operator access 1 of 2 screen displays.
7. Select the authorized operator options, select Next .
The Authorized Operator-Operator access 2 of 2 screen displays.
CAUTION
After you add an operator, if you enable or disable the
Authorized Operator setting, the system deletes all the
patient test results.