25
Calling
© Siemens AG 2004, E:\Auftr
ag\Siemens\MobilePhones
\CF75
Adonis\en\LA\ADONIS_Phone.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
right page (25)
of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:58)
Incoming calls during a call
You may need to register for this serv-
ice with your service provider and set
your phone accordingly (p. 83). Dur-
ing a call, you may be advised that
there is another call waiting. You will
hear a special tone during the call.
You have the following options:
•
Accept the waiting call in addition to
the first
§Swap§
Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap be-
tween the two calls.
•
Reject the waiting call
§Reject§
Press.
Or
§Divert§
The waiting call is divert-
ed, for example, to the
mailbox.
•
Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
Ending call(s)
B
Press the End key.
After the
Return to held call?
display,
you have the following selection:
§Yes§
You accept the call on hold.
§No§
You end the 2nd call.
Conference
b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been es-
tablished:
§Options§
Open menu and select
Hold
. The current connec-
tion is maintained.
J
Now dial a new number.
When the new connec-
tion is established ...
§Options§
… open menu and select
Conference
. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End
B
All
calls in the multiparty
conversation are ended
when the End key is
pressed or the clamshell is
closed.