Siemens CERBERUS PYROTRONICS PXL Скачать руководство пользователя страница 50

Страница: 50 / 83

PXL Conventional Fire Alarm Control Panel

Programming

In the Program menu, the Responding Modules option changes to

Delete Modules. When the user confirms that the modules have

been removed, the menu selection returns to Responding Modules,

and the trouble condition clears upon system reset.

HELP

- The Help selection can be accessed at any time by pressing

the blue Help (?) button. The user receives detailed instructions for

the function that is currently displayed. There are 2 ways to exit the

Help screen. The user can do either of the following:

1. Press the Help (?) button again to return to the function screen.
2. Scroll through the help instructions and press DONE to return to

the function after reading all instructions.

HISTORY

- This menu selection allows the user to view a record of

events in four categories:

1. Alarms and Resets
2. Supervisory Conditions
3. System Trouble
4. Zone Trouble Conditions

Thirty events can be stored in each category. Events are stored

sequentially. Once 30 events are reached, new events overwrite

previous events.

HISTORY CLEAR

- This feature allows the installer to clear all

history events from the system's memory. One operation clears

history for all event types. This can be done after installation to clear

those events associated with system start-up, testing, and trouble-

shooting.

MAP ZONES TO RELAYS and MAP ZONES TO BELLS

- Any zone

can be mapped to any relay or any bell circuit with the following rules

and exceptions:

The default map for all alarm causing zones is:

all alarms map to

every bell circuit.

Bell 1 map from all alarm zones cannot be changed as required

by Underwriters Laboratories, Inc.

The default map for all supervisory zones is:

no mapping.

Do not map supervisory zones and alarm zones to the same bell

circuit or relay.

Do not map supervisory or generic zones to non-silenceable bell

circuits.

Zone to Bell or Zone to Relay logic is 'OR' only. 'AND' logic

(cross-zoning) is not available.

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Содержание CERBERUS PYROTRONICS PXL




















































































Результаты поиска

Содержание CERBERUS PYROTRONICS PXL

Отзывы:

Похожие инструкции для CERBERUS PYROTRONICS PXL

Бренды по названию

Популярные бренды

Siemens CERBERUS PYROTRONICS PXL, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание CERBERUS PYROTRONICS PXL

Отзывы:

Похожие инструкции для CERBERUS PYROTRONICS PXL

Бренды по названию

Популярные бренды