©
Sieme
ns
AG
2003, L:\Mobil\R65\C
70_H
era
_P
oC\en\fug\C70_Startup.fm
Getting started
12
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (12)
of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Changing CLIPIt™
covers
You can use CLIPIt™ covers (accesso-
ries) to personalise the appearance
of your phone as you wish.
Before changing the keypad or
faceplate, switch the phone off.
Dismantle the phone
Take off the battery cover and
remove the battery (see p. 10). To
remove the faceplate, insert the key
into the opening provided, apply
slight pressure
1
and turn it at the
same time
2
to open the lock.
Do not use the key to lift the phone
as this could damage the faceplate.
Assemble the phone
First insert the keypad mat
3
into
the faceplate. Ensure that it is sitting
exactly in place.
*) If there are small pins at the bot-
tom of the faceplate: position the
tabs on both sides of the keypad mat
precisely on these pins. before car-
rying out step
4
.
Insert the phone into the bottom of
the upper faceplate
4
and then
push it in carefully until it clicks into
position
5
. Finally, replace battery
3
