BC8001A Installation and Operating Instruction
Page 29/49
11.4 How to test/walk-test
Function:
Allow to test the correct function of alarm devices. At test/walk-test mode alarm
can be normally generated if alarm condition is fulfilled. But alarm devices are not really
activated. After the test work is completed immediately restore the test mode. The test
/walk-test events are not saved in history record. The difference of test and walk-test:
Test
: restore to normal mode manually.
Walk-test
: restore to normal mode automatically after a certain time (timeout is set by
BF8001 tools or by station property of control unit).
Status:
No message is displayed.
How to test:
1. Press “ ” to enter main menu.
The main menu is displayed.
2. Press “
↓
” to choose “3.Operatopm” and press “OK” key.
All stations are displayed.
3. Press “
↓
” to choose one station which includes the desired line and press “OK” key.
4. Press “
↓
” to choose “1.Line” and press “OK” key.
All lines are displayed.
5. Press “
↓
” to choose one line which includes the desired point and press “OK” key.
6. Press “
↓
” to choose “Points” and press “OK” key.
All points connected with the chosen line are displayed.
Test Screen
<Operate Stations > L3 A
001 BC8001A Compact Stati
<Operate Stations > L3 A
1.Line
<Operate Lines > L3 A
001 BC8001A IOs
002 BC8001A Ports
003 BDS Line
004 BC8001A Powers
<Operate Lines > L3 A
Points
Isolate
Open
Test
<Main Menu> L 3 A
1. RT Information
2. History Record
3. Operation
4. Configure
<RT – Test:1> L1 A
- 1 Room 102 BDS031 Heat
<Operate Points> L3 A
001 BDS051(A) 001
002 BDS031(A) 002
003 BDS121(A) 003
004 BDS221(A) 004
