manualshive.com logo in svg

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 28 / 238

Поделиться
Скачать
Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 28

System Overview

Protective Measures

20 

/ 44

AXD3-340.620.13.01.02

Operator Manual

On activation of one of the safety devices (shutdown devices) all system move-
ments stop and are blocked.

This means that one cannot move out from the blockage oneself.

If it is not possible to remove the obstruction causing the problem, call in the Sie-
mens Uptime Services.

Movements are possible again only after one of the safety devices has be deac-
tivated.

Possible collisions of the system with a 
ceiling-mounted support

1

❏

System movements are possible only if the ceiling-mounted support is in its 
park position or if the bypass switch is activated if necessary.

❏

Prior to actuating system movements with the bypass switch activated, verify 
that no collision can take place with the ceiling-mounted support, the X-ray 
tube assembly or the collimator. (No collision monitoring.)

Measures for avoiding equipment damage

◆

Before activating system movements, especially tilting the table, make sure 
that the movement range is free of obstructions.

◆

Move especially monitor support systems, operating consoles, gurneys, beds 
and instrument tables out from the tilting range of the table and remove 
chairs, steps, stands, waste containers and similar objects from the move-
ment area. (No collision monitoring.)

◆

Do not place any objects or consumable material on the cover of the table sup-
port, on the spotfilm device and on the longitudinal guides of the stand car-
riage.
– Considerable forces which can damage these objects in the area of move-

ment of the systems arise during movements of the spotfilm device or of 
the tabletop.

◆

Do not place any loose objects anywhere on the table.
– These objects could fall down when the table is tilted, causing injury or 

damage.

1

optional

Warning

If system movements are possible even though the ceiling-mounted support is 
not in the park position and the bypass switch is not activated, 
immediately press the emergency shutdown button and notify the 
SIEMENS Uptime Service.

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов