Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 225

Страница: 225 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

Holding device for eight filters

Use

For storing a maximum of eight compensating filters

Attaching the

wall holder

◆

Fasten the holder to the wall at working height in a suitable place with the en-
closed wall plugs and screws.

Equipping the

wall holder with

compensating filters

◆

Remove the compensating filters from the packaging.

◆

Turn the filters so that the designation on the filters can normally be read from
above.

◆

Place the filters in the upward-inclined compartments.

Using the

compensating filters

◆

Remove the required compensating filter from the wall holder.

◆

Push the locking lever on the left collimator accessory rail to the left.

◆

Slide the filter into the collimator accesssory rails in the correct direction for
the examination.
– The locking lever on the accessory rail springs back to the right.

◆

Check that the compensating filter sits firmly in the collimator.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 225 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: