Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 193

Страница: 193 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

Footboard Extension

Use

Extension board for enlarging the surface of the footboard, especially for lateral
patient positions.

The maximum permissible patient weight on the footboard extension is 180 kg.

Attachment

◆

Move the tabletop with the footboard attached to approximately the 80° posi-
tion.

◆

Move the tabletop headwards.

◆

Place the footboard extension on the rear end of the footboard.

◆

Push the locking lever (1) on the rear of the footboard in the direction of the
arrow.

◆

While exerting pressure on the extension board, fit the metal pegs of the ex-
tension into the holes of the footboard.

The footboard extension is not monitored by the collision computer. Therefore
proceed with care when tilting the tabletop with the footboard and extension
attached towards the ceiling.
With the footboard extension the foot restraints cannot be used.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 193 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: