Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 238

Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 122

Examination

Digital Radiography

38

/ 52

AXD3-340.620.13.01.02

Operator Manual

Programming run

The X-ray system stands in the starting position (position 1) for the programming
run (abdomen)

Release 1st step

◆

Deflect the joystick above / below or press the key to the left / right
– The X-ray system moves into the next position
– The position is displayed on the display in the remote control console, e.g.

“2/4”

– The settings of the starting position are stored.

◆

Adapt the following parameters with the corresponding operating elements:
– Primary rectangular collimator
– Cu prefilter
– Dominant
– Semitransparent wedge filters (if option present)

Release 2nd step and

further steps

◆

Deflect the joystick above / below or press the key to the left / right
– The X-ray system moves into the next position
– The position is displayed on the display in the remote control console, e.g.

“3/4“ up to max. ”4/4”

– The settings of the positions are stored.

◆

Move to each position one after the other and adapt the radiation field and
dominant as far as required.

Move the X-ray sys-

tem into the starting

position

◆

Deflect the joystick up / down or press the key to the left / right until the X-ray
system has reached the starting position again.
– The position is displayed on the display in the remote control console, e.g.

”1/4”

– The stored parameters are set automatically.

A maximum of 5 steps and thus 6 positions are possible.

«
...
120
121
122
123
124
...
»

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов