Siemens ADVIA 1800 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 222

Siemens ADVIA 1800 Скачать руководство пользователя страница 94

94

ADVIA 1800 Operator’s Guide

Batch transmission to a host computer

Use the Review/Edit window to transmit selected patient results. The data clean feature is
available to check the sample results for problems.

Printing sample data

The Print report window is only available from the supervisor logon. To print reports, go
to the Review/Edit window and use the Print report button.

CAUTION

Tests on the Print Report form must be in the same order as they display at the
System Test List window to avoid incorrect positioning of results on the print
report.

Do not modify the order

of the test names at the System Test list window

after the initial setup. If you reposition any test names on the System Test List
window after initial setup, results for samples already run could be associated with
the wrong test name.

1.

At the Menu Panel, select

Request

, then select

Review/Edit

.

2.

At the Review/Edit window, select the

Print

Report

button.

3.

At the Print Report window, select a Sample Type(T) and File Data(F):

a.

If you select Archive in the File Data (F) field, the Filing File Name (I) field is
activated.

b.

Select the

Open

button.

c.

Select a file name at the Open window.

4.

In the Specification range (R) field, select the

arrow

in the field and select

Input

Range

or

All

from the list.

5.

In the Number entry format (N) field, select the

arrow

in the field and select a format

from the list.

6.

In the Last no. entry format (E) field, select the

arrow

in the field and select a format

from the list.

7.

In the Report Form File (O) field, select a print format for the report.

a.

Select the

Open

button.

The Open window displays, defaulting to the ETC folder.

Two sample report formats are available:
• the Chart.frm file is formatted for a single sample.
• the Consoled.frm file is formatted for multiple samples.

Customer defined print formats also display in the folder.

b.

At the Open window, select a file name for the report format.

c.

Select

Open

.

8.

Enter a start number in the Start number (S) field and a last number in the Last number
(L) field.

«
...
92
93
94
95
96
...
»

Содержание ADVIA 1800































































































































































































































Отзывы:

Нет отзывов