Siemens ADVIA 1800 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 222

Siemens ADVIA 1800 Скачать руководство пользователя страница 38

38

ADVIA 1800 Operator’s Guide

Software Overview

CAUTION

Load only Siemens-specified software onto your ADVIA Chemistry system PC to
avoid loss of data.

This section of the manual describes the software windows available to configure and run
your chemistry system. It does not explain how to use these windows. For detailed
information on the use of the windows, refer to the online Operator’s Guide.

The software controls most of the functions run by the chemistry system. The software,
which runs under the Windows operating system, starts automatically when you turn on
the PC.

You start the software from the Startup window, and stop it from the Menu Panel.

After the software has started, the Menu Panel and the Operation Panel appear at the top of
your screen.

As long as the software is running, these windows remain in the same position (unlike
most Windows XP windows). Use the top display option (Systems(s)) to allow other
windows to display on top of the Menu Panel and Operation Panel.

Startup window

The Startup window is the first window you see when you turn on the PC and the last
window when you stop the system.

Perform any of the following tasks at this window:

•

new start

•

restart

•

back up and restore system files

•

shut down and restart Windows XP

1.

At the Menu Panel, select

System(S

)

(to open the System menu), then select

Exit(X)

.

2.

When prompted, select

Yes

, then select

Yes

when prompted again.

Windows restarts.

3.

When prompted, press

Ctrl

-

Alt

-

Delete

.

4.

At the Log on to Windows window, enter the Windows User name and Password.

5.

Select

OK

.

The Startup window opens.

If you select

, the Startup window closes, leaving you in Windows (you are not

able to perform the above functions). To open the Startup window again, restart Windows.

«
...
36
37
38
39
40
...
»

Содержание ADVIA 1800































































































































































































































Отзывы:

Нет отзывов