manualshive.com logo in svg

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 95 / 138

Поделиться
Скачать
Siemens ACUSON Freestyle Скачать руководство пользователя страница 95

ACUSON

 Freestyle User Manual   

5-5

Scanning

Connecting the Probe

There are two ways to operate the probe with the system:

 

■

Cabled

 

■

Wireless

Cabled Probe Operation 

To operate the probe with the removable probe Cable Adapter, plug the probe cable into the 

system I/O panel (see “Console Inputs/Outputs Panel” on page 1-5), and insert the probe end 

into the probe. 

NOTE: 

Both ends are keyed to prevent improper connection. Do not use force to 

connect either end of the cable. 

During cabled probe operation, the probe comes up with the image frozen. Select 

Unfreeze

 to 

go to real-time scanning. 

NOTE: 

If a probe is already connected using the probe Cable Adapter you cannot 

connect another probe using the wireless connection. To make a wireless probe 

connection, unplug the probe Cable Adapter at the probe or system console.

Содержание ACUSON Freestyle











































































































































Отзывы:

Нет отзывов