Siemens ACUSON Freestyle Скачать руководство пользователя страница 66

Страница: 66 / 138

2-46

ACUSON

Freestyle User Manual

Safety and Care

Recycling Batteries

WARNING:

Never dispose of batteries by burning or by flushing into any waste water

system, for example, a lavatory. Compromising the structural integrity of a battery can

result in leakage or explosion and the potential for personal injury.

WARNING:

Do not throw batteries into the trash. Collect and recycle used batteries

separate from other waste.

The system does not contain alkaline batteries. Printed circuit boards may contain lithium

batteries. If the system clock no longer keeps time, it could be time to replace the battery.

Contact your local Siemens representative.
Recycle batteries according to local, state, and regional regulations. Use a battery collection

program available in your country to recycle batteries.
To the extent required by local laws and regulations, Siemens will collect and recycle batteries

for this product at no charge. Contact your local Siemens representative for battery shipment

instructions.

Disposing of the Packaging Materials

Dispose of or recycle the packaging materials according to local, state, and regional

regulations.
To the extent required by local laws and regulations, Siemens will collect and dispose of

packaging materials for this product. For more information, contact your local Siemens

representative.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 66 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: