Siemens ACUSON Freestyle Скачать руководство пользователя страница 64

Страница: 64 / 138

2-44

ACUSON

Freestyle User Manual

Safety and Care

ACUSON Freestyle Rollstand Configuration

WARNING:

When operating and transporting the ultrasound system using the ACUSON Freestyle

Rollstand, insure that the rollstand is configured according to the specifications provided

in this manual. Failure to do so can cause the system to tip over and create a risk for

injury to the user or patient and damage to the system.

Rollstand Configuration

1. Quick Release Adaptor Plate: the top of the

plate

should be placed no higher than

48 in/122 cm. Do not place anything other than the Freestyle, probe batteries, and probes

on this mount.

2. Handle: the top of the Handle should be placed no higher than 40 in/101 cm from the

floor.

Keyboard Shelf: should be placed no higher than 33 in/84 cm from the floor.

4. Rear Storage Basket: the top of the basket should be placed no higher than 30 in/76 cm

from the floor. Weight limit 4 lbs/1.8 kg.

5. Front Storage Basket: top of basket should be placed no higher than 24 in/61 cm from the

floor. Weight limit 4 lbs/1.8 kg.

6. Cable Wrap: should be placed no higher than 22 in/56 cm.
7.

Video Printer Shelf: the shelf should be placed no higher than 12 in/30 cm from the floor.

Weight limit 6 lbs/2.7 kg. Secure printer with straps.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 64 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: