Siemens ACUSON Freestyle Скачать руководство пользователя страница 59

Страница: 59 / 138

ACUSON

Freestyle User Manual

2-39

Safety and Care

Recommended Use of the Probe Sheaths

Siemens makes every effort to manufacture safe and effective probes. You must take all

necessary precautions to eliminate the possibility of exposing patients, operators, or third

parties to hazardous or infectious materials. These precautions should be considered in the

use of any application that may indicate the need for such care, for example, when scanning

patients with open wounds.
Probe sheaths are single use items used to ensure proper acoustic coupling and provide

a prophylactic barrier for the intended ultrasound application. Sheaths are available for all

probes. Use only market cleared probe sheaths.

Application

WARNING:

After placing the sheath over the probe, visually inspect the sheath to ensure

there are no defects. Do not use the sheath if it has any holes or tears.

WARNING:

Carefully follow the labeling instructions provided with the probe sheath.

Disposal

While wearing protective gloves, remove the probe sheath from the probe and dispose of it

according to local, state, and regional regulations for biohazardous waste.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 59 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: