Siemens ACUSON Freestyle Скачать руководство пользователя страница 40

Страница: 40 / 138

2-20

ACUSON

Freestyle User Manual

Safety and Care

Implantable Devices

WARNING:

Ultrasound systems, like other medical equipment, use high-frequency

electrical signals that can interfere with implantable devices such as pacemakers and

implantable cardioverter-defibrillators (ICDs). If the patient has such an implantable

device, you should be aware of any interference in its operation and immediately power

off the ultrasound system.

WARNING:

The probe battery and probe adapter cable well at the back of the probe,

away from the transducer end (see illustration) into which the probe battery or cable

adapter are placed, contains magnets used to secure the probe battery and cable

adapter. Keep this end of the probe at least 3 cm (1.3 inches) away from implanted

cardiac rhythm devices.

Probe battery (showing connector side); insert with battery connectors facing down

1. Probe battery/cable adapter well
2. Location of magnets

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 40 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: