Siemens ACUSON Freestyle Скачать руководство пользователя страница 26

Страница: 26 / 138

2-6

ACUSON

Freestyle User Manual

Safety and Care

Intended Use

WARNING:

The analysis of results from an ultrasound examination requires that you are

trained in the interpretation of diagnostic ultrasound studies and are qualified to make

clinical diagnoses.

Prescription Device Statement: In the United States of America, federal law restricts this device

to sale or use by, or on the order of, a physician.

The

ACUSON

Freestyle ultrasound system supports the applications listed in this

section .

WARNING:

The ACUSON Freestyle ultrasound system is not intended for ophthalmic

studies.

WARNING:

No claim is made regarding the safety or efficacy of ultrasound contrast

agents. It is important that you carefully follow the indications, instructions for use,

warning, and cautions that are provided by ultrasound contrast agent manufacturers as

part of the product labeling.

WARNING:

Cardiac rhythm disturbances during perfusion studies using gas ultrasound

contrast agents have been observed in the diagnostic range of mechanical index (MI)

values. See the specific package insert for the contrast agent being used for details.

CAUTION:

In performing fetal ultrasound studies, it is important to consult consensus

statements and health care organization guidelines for the use of ultrasound imaging in

pregnancy. Reference: Diagnostic Ultrasound Imaging in Pregnancy. NIH Consensus

Statement 1984 Feb 6-8;5(1):1-16

WARNING:

Use sterile, endotoxin-free sheaths in intraoperative neurological scanning.

Disinfectant/sterilant residue left on the probe is neurotoxic and endotoxin is pyrogenic.

WARNING:

Probe sheaths cannot be relied upon to prevent contamination of the probe

when used intraoperatively on patients with known or suspected Creutzfeld-Jakob disease

(CJD). A probe exposed to central nervous system tissue from know or suspected CJD or

Variant CJD should be destroyed since it may not be possible to sterilize. (See http://www.

cdc.gov/ncidod/qa_cid_infection_control.htm)

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 26 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: