Siemens ACUSON Freestyle Скачать руководство пользователя страница 129

Страница: 129 / 138

ACUSON

Freestyle User Manual

8-3

Connectivity

Overview of Connectivity

The

ACUSON

Freestyle includes the DICOM (Digital Imaging and Communications in Medicine)

networking capability. DICOM communications comply with the DICOM standard and provide

links between the system and DICOM picture archival systems (PACS), modality worklist

servers, and storage commitment servers.
Consult with your PACS Administrator when using the DICOM features of the

ACUSON

Freestyle.

NOTE:

Confirm compatibility between your DICOM PACS system and the

ACUSON

Freestyle before archiving from the

ACUSON

Freestyle to the PACS system.

System configuration for connectivity are usually carried out by your organization’s network or

PACS Administrators.
Connectivity features may be options which are not provided on every system.

Configuring the Network Settings

To configure your system for connectivity, go to

SETUP

SETTINGS

NETWORK

. This takes you

to the Network page.

Ethernet Setup

This defines the network identification of the system, using the IP address, Subnet Mask and

Gateway to give the

ACUSON

Freestyle a unique identifier on a specific network.

Check the

Auto IP Enabled

box to enable the IP address to be assigned on startup.

Ethernet Network Configuration Fields

Network Field

Description

IP Address

When checked allows the system to automatically obtain an IP

Address.

Auto IP Enabled

Automated IP address assignment.

Subnet Mask

IP address formatting.

Gateway

Network access point.

[OK]

Saves the settings for the network.

[Cancel]

Closes the menu without saving settings.

To edit the IP Address, Subnet Mask, or Gateway, click on the typewriter symbol next to the

field.

NOTE:

The MAC address displayed cannot be edited.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 129 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: